Linguaggio:

S1 SOFT CUT & GLOSS

Home » Prodotti » Prodotti per lucidatura » S1 SOFT CUT & GLOSS
Farby antyporostowe
S1 SOFT CUT & GLOSS

S1 PASTA ABRASIVA


NO SILICONE


Sea-Line S1 preffesional Marine polishing paste is a very effective polishing paste. Does not contain silicone.
Recommended for polishing gelcoat surfaces, manufacturing composites, and topcoats. S1 quickly removes scratches and defects after sanding, guaranteeing an ideal surface. Includes high-quality polishing minerals, which ensure a rapid removal of defects. Achieves a high luster by using a one-step process. Working with S1 saves time. Optimal composition. Does not cause excessive heating of the surface and is easy to clean.

For surfaceGelcoat, topcoat, composites, poliuretan paints
FunctionEliminates defects;
removes chalking and surface discoloration; high gloss; protection
Type of damageSanding P1200 and up
ApplicationHand or machine – rotation max 2000
Recommended applicatorLamb wool, hard sponge
Pack0,500kg code 300005578
Colorlight green

 S1 polishing paste – instructional video




Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę