Langue:

Diluants – pinceau / rouleau

Accueil » Produits » Additives » Diluants – pinceau / rouleau
Farby szkutnicze
Diluants – pinceau / rouleau

Le dilutif pour les produits polyuréthane est un mélange de dilutifs organiques choisis. Produit adapté à diluer les produits polyuréthane – peinture couleur et vernis incolore. En effet, il permet d’obtenir un produit aux paramètres strictement définis. Les proportions détaillées d’utilisations sont données sur les fiches techniques des produits. Il ne faut pas dépasser les doses recommandées de dilutif.


Emballage :250 ml1 l
Codes :71155746
Coloreur :RAL
Blanc____20–25%
Crémeux 101520–25%
Rouge 300315-20%
Bleu marine 500315-20%
Bleu 501520-25%
Vert 602915-20%
Gris 700015-20%
Noir 900515-20%
Vernis polyuréthane incolore – éclat function primaire x15-20 %
Vernis polyuréthane incolore – éclat x0-5 %

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę