Langue:

SILVER SPEED HARD ANTIFOULING

Accueil » Produits » Peinture antifouling » SILVER SPEED HARD ANTIFOULING
Producent farb jachtowych
SILVER SPEED HARD ANTIFOULING


Use biocides safely. Always read the label and product information before use.

TypeGRP laminates, wood, aluminium, steel
PlaceBelow waterline
Function Antifouling paint discourages the growth
of barnacles, weed, and other water life on the submersed hull of the boat.
Application brush, roll, airless spray gun (only professional)
Thinning *No recommended
Theoretical coverage For 1lby rollerby spray
9 ~ 10 m²3 ~ 5 m²
Coat thickness (WTF)98 μm196 μm
Finish thickness (DTF)50 μm100 μm
Coats number21
Recommended dry layer100 μm
Hardening the surfaces23ºC15ºC
Touch dry30 minutes45 minutes
Immersion:8 hours12 hours
Dry to recoat (overcoating)min. 6 hoursmin. 10 hours
Dry to launch (immersion times)max 6 monthsmax 6 months
Pack0,75 l2,5 l
Color **codecode
red

navy

black

300008382

300008384

300008386

300008381

300008383

300008385

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Antifouling available only in:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę