Langue:

Entrepeise Européenne

Accueil » Récompenses » Entrepeise Européenne
Producent farb jachtowych

Europejska Firma (Entrepeise Européenne) – est un prix attribué par la Rédaction de ”Przegląda Gospodarczy (Revue économique)”. supplément à ”Gazeta Prawna (Gazette juridique)”. Dans le cadre du concours, la Réaction récompense et présente les entreprises polonaises qui fonctionnen exceptionnellement bien.

Les lauréats du concours gagnent les parts du marché et dépassent les concurrents grâce aux investissements dans les nouvelles technologies, l’infrastructure, les performances et la qualité. On recconaît les entreprises qui investissent dans l’augmentation des compétences et des qualifications de leurs employés, qui adaptent leur activité au standards éuropéens. Nous en sommes lauréat en 2003.


Partager:

Voir aussi
Autres threads de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę