Lengua:

Europejska Firma 2003

Página web » Premios » Europejska Firma 2003
Kosmetyki do naprawy łodzi oraz jachtów

Europea Empresa – esto es el premio concedido por la Redacción de ”Przegląd Gospodarczy”. El suplemento de ”Gazety Prawnej”. En el marco del concurso la Redacción galardona y presenta las empresas polacas, del funcionamiento perfecto.

Los galardonados del concurso ganan el mercado, adelantando la competencia, gracias a las inversiones en las tecnologías, infraestrúctura, eficacia y la calidad. Para distinguirse tienen la oportunidad las empresas que invierten en el aumento hasta las normas europeas. Fuimos galardonados de este concurso en el año 2002.


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę