Langue:

S05 ONE STEP, HEAVY CUT & GLOSS – pâte à polir

Accueil » Produits » Système de polissage » S05 ONE STEP, HEAVY CUT & GLOSS – pâte à polir
Szpachlówki do łodzi
S05 ONE STEP, HEAVY CUT & GLOSS – pâte à polir

So5 POLISHING COMPOUND – ONE STEP, HEAVY CUT & GLOSS

NO SILICONE




TEXTURE :

PACKAGING:

APPLICATION METHODS:

PRODUCT DESCRIPTION :

Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.

Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.

Method of use:

Przygotowanie powierzchni :

Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

szlifowanie papierem P800Polish the surface with sandpaper of final gradation : P800 →


szlifowanie papierem P1200Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge « PROFI » :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean the surface, apply the compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture


max obrotySlowly increase the speed max. to 1800 RPM working with a little pressure


Further steps :

Clean the surface. In order to protect the surface, it is recommended to use:


Technical information:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę