Langue:

S4 PROTECT WAX – CIRE DE PROTECTION

Accueil » Produits » Système de polissage » S4 PROTECT WAX – CIRE DE PROTECTION
Szpachlówki do łodzi
S4 PROTECT WAX – CIRE DE PROTECTION

S4 CIRE DE PROTECTION

S4 CIRE DE PROTECTION Assure une brillance idéale et une protection longue durée. Le produit diminue l’adhérence de saletés à la surface. Conseillé pour les laminés et les gelcoats.

Mode d’emploi:

La surface doit être propre et sèche. A l’aide d’un chiffon mou appliquer une fine couche homogène et polir.


EMBALLAGE :

250 ml

CODES :


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de S4 PROTECT WAX – CIRE DE PROTECTION


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę