Langue:

Produits et matériaux complémentaires

Accueil » Produits » Additives » Produits et matériaux complémentaires
Sea-Line
Produits et matériaux complémentaires


CALE A PONCER EN LIEGE

Uzupełniające akcesoria lakiernicze klocek korkowyCale en liège naturel, pour les travaux de ponçage. D’une part, la surface est conçue pour optimiser le travail, et d’autre part, la cale est adapté pour une tenue confortable.


Largeur: 25 x 60 x 105mm300003446

BLOCK A PONCER AVEC INTERFACE EN MOUSSE

Uzupełniające akcesoria lakiernicze kolcek piankowyBloc de ponçage fabriqué avec quatre types de matériaux, grâce à quoi il est très léger mais en même temps se caractérise par sa rigidité intérieure et une résistance acrrue.


Les bloc poss-dent deux faces de travail :

Largeur: 140 x 75 mm300003608
Largeur: 200 x 75 mm300003609
Largeur: 290 x 75 mm300003610

CALE A PONCER EN PLASTIQUE

Uzupełniające akcesoria lakiernicze kolcek plastikowyCale pour travaux de rectification munie de poignées pour papier.


Largeur: 165 x 87 mm300000388
Largeur: 212 x 105 mm300003154

FEUILLE DE PROTECTION

Uzupełniające akcesoria lakiernicze folia ochronnaProtège contre la peinture, la poussière, l’humidité. Produit indispensable lors de travaux de vernissage. Antistatique.


Largeur: 4 x 5 m UNIVERSAL300005703
Largeur: 4 x 5 m 0,007 mm300001981

PAPIER ESSUIE-TOUT (ROULEAU)

Uzupełniające akcesoria lakiernicze recznik papierowy rolkaPapier absorbant en rouleau, blanc, à deux couches, fabriqué à base de cellulose.


Largeur: 208m300005703

CHIFFONS ANTISTATIQUES

Uzupełniające akcesoria lakiernicze sciereczki antystatyczneChiffons antistatiques, avec bonne rétention des poussières, conçus pour le nettoyage de surfaces avant vernissage. Produit applicable avec des systèmes à eau et 2K. Conserver dans un récipient fermé. Ne pas appliquer sur des surfaces échauffées.


10 lettres – largeur: 40 x 80 cm300003842

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę