Wyszukaj na stronie
Menu

Thinner For 1k (Primer, Varnish, Enamel)

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time of drying.

CapacityCode
1 l300008177
Thinner For 1k (Primer, Varnish, Enamel)

Technical informations

Product description "Thinner For 1k (Primer, Varnish, Enamel)"

Using the appropriate thinner recommended by the manufacturer ensures not only the correct technical parameters during application but also guarantees the achievement of the desired final result. Yacht thinner THINNER for 1K is a mixture of carefully selected solvents. Detailed instructions on the proportions for using the thinner are provided in the technical data sheets of the respective products.

You have questions about the product - Thinner For 1k (Primer, Varnish, Enamel)

    Also check

    Our FAQ answers to frequently asked questions

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Can I use universal thinner?

    We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę