Wyszukaj na stronie
Menu

S9 PRO CUT – Polishing Compound

S9 PRO CUT polishing compound has been developed for effective polishing of both white and dark gelcoats. It is ideal for use with conventional rotary polishers and pneumatic polishing machines, ensuring high working efficiency. The product is designed for use after sanding with P800 grit and finer. It provides fast and effective removal of sanding marks while delivering a high-gloss finish. A professional solution for demanding finishing applications.

WeightCode
Bottle 1kg17667
S9 PRO CUT – Polishing Compound
  • Cut level = 10
  • Gloss level = 7

Does not contain silicone or wax fillers

Technical informations

Color

  • white

Application method

  • Rotary polisher
  • Pneumatic polishing machine (industrial)

Polishing pads:

  • Wool pads
    • Lambswool pads
    • Hard foam pads
    • Soft foam pads

Product description "S9 PRO CUT – Polishing Compound"

A polishing compound designed for production companies where the highest possible cutting power is required. It is intended for all types of polishing applications where the primary purpose is to quickly remove sanding marks and achieve a high-gloss finish. The compound effectively removes defects resulting from sanding operations on finished products, even after sanding with P800-grit abrasive paper. It is ideal for use with conventional rotary polishers and pneumatic polishing machines, ensuring high working efficiency.

Advantages of S9 PRO CUT:

  • Highest possible cutting power
  • High-gloss finish
  • Fast working performance
  • Does not clog or cause matting of wool polishing pads

Basic information

Application

White and dark gelcoat

Tooling gelcoat (technical)

Finished GRP products

Categoryproduction
Function

Defect removal from the surface

Restoring gloss

Consistencypaste
Surface Preparation*machine sandinghand sanding
light colordark colorlight colordark color
gelcoatP800⇒P1200⇒P1200⇒P1200⇒
tooling gelcoat (technical)P800⇒P1200⇒P2000⇒
High-hardness surfaceP800⇒P1200⇒P2000⇒

* minimalna gradacja papieru ściernego

Details of the application method

  • Polishing Process:

    Surface Preparation

    Remove surface defects using abrasive paper of the appropriate grit.

    Sposób aplikacji - S9 PRO CUT – Polishing Compound

    Sea-Line® S9 polishing compound quickly and effectively removes scratches and defects from the surface after sanding with a minimum grit of P800→.

  • Sposób aplikacji - S9 PRO CUT – Polishing Compound

    When using S9 PRO CUT on very hard tooling gelcoats (technical gelcoats) or dark colours, it is recommended to finish the sanding process with a minimum grit of P1200.

  • Polishing

    Sposób aplikacji - S9 PRO CUT – Polishing Compound

    Polishing with S9

    Polishing with S9 PRO CUT can be carried out manually or using a mechanical rotary polisher with adjustable speed or a pneumatic industrial polishing machine.

  • Sposób aplikacji - S9 PRO CUT – Polishing Compound

    The polishing process with a rotary polisher should be started at a low speed of 800–1,000 rpm. Gradually increase the speed until the compound is completely worked into the surface and a full gloss is achieved.

  • Sposób aplikacji - S9 PRO CUT – Polishing Compound

    The speed of the rotary polisher should not exceed 1,800 rpm during the final stage of polishing.

  • Finishing After Polishing

    Sposób aplikacji - S9 PRO CUT – Polishing Compound

    Clean the surface of any remaining polishing compound using a microfiber cloth.

    If necessary, any minor polishing defects left on the surface after using S9, such as swirl marks or haze, can be removed:

    • using S1 Premium polishing compound
    • when using S1 PREMIUM, it is recommended to change the polishing pad to one made of 100% lambswool (Sea-Line® BRAYT MM type).

  • The polished surface can finally be protected using:

    • S4 PROTECT WAX
    • S5 QUICK WAX

You have questions about the product - S9 PRO CUT – Polishing Compound

    Related products

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.
    Wyjście
    Przeiń na górę