Wyszukaj na stronie

S05 One Step, Heavy Cut & Gloss – polishing paste

Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.

WeightCode
1 kg10204
S05 One Step, Heavy Cut & Gloss – polishing paste
  • Cut level = 9
  • Gloss level = 8

No silicone

Application method

  • rotation machine
  • hand

Product description "S05 One Step, Heavy Cut & Gloss – polishing paste"

Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.

Texture:

  • Paste

S05 One Step, Heavy Cut & Gloss – polishing paste - instructional video

Details of the application method

  • Surface preparation:

    Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Polish the surface with sandpaper of final gradation : P800 →

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.

  • Polishing:

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Clean the surface, apply the compound onto an element or head (wool or tough sponge)

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Slowly increase the speed max. to 1800 RPM working with a little pressure

  • Further steps:

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Clean the surface. In order to protect the surface, it is recommended to use:

    • S4 PROTECT WAX
    • S5 QUICK WAX

You have questions about the product - S05 One Step, Heavy Cut & Gloss – polishing paste

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I use yacht paints for a drinking water tank?

    Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę