Wyszukaj na stronie
Menu

Rechargeable Inspection Lamp Brayt

The lamp is designed for inspecting polished surfaces. It is also recommended for color matching in paint shops and production environments.

  • 5W LED COB technology
  • Luminous flux of 400 lm
  • A large 2,6 Ah Li-Ion rechargeable battery for 4 hours of continuous operation
  • High mechanical strength (IK07 class)
  • Two lighting modes: full and saving
  • Equipped with a swiveling magnetic base for convenient mounting and tilting of the lamp at any angle
  • The kit includes a docking station with a universal USB charging jack
  • The inspection lamp is designed for use in the process of colour selection in paint shops or in other professional service establishments. The lamp is not suitable for home lighting.
Code
300008048
Rechargeable Inspection Lamp Brayt

You have questions about the product - Rechargeable Inspection Lamp Brayt

    Also check

    Our FAQ answers to frequently asked questions

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę