Wyszukaj na stronie

S05 One Step, Heavy Cut & Gloss – polishing paste

Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.

WeightCode
1 kg10204
S05 One Step, Heavy Cut & Gloss – polishing paste
  • Cut level = 9
  • Gloss level = 8

No silicone

Application method

  • rotation machine
  • hand

Product description "S05 One Step, Heavy Cut & Gloss – polishing paste"

Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.

Texture:

  • Paste

S05 One Step, Heavy Cut & Gloss – polishing paste - instructional video

Details of the application method

  • Surface preparation:

    Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Polish the surface with sandpaper of final gradation : P800 →

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.

  • Polishing:

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Clean the surface, apply the compound onto an element or head (wool or tough sponge)

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture

  • Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Slowly increase the speed max. to 1800 RPM working with a little pressure

  • Further steps:

    Sposób aplikacji - S05 One Step, Heavy Cut & Gloss – polishing paste

    Clean the surface. In order to protect the surface, it is recommended to use:

    • S4 PROTECT WAX
    • S5 QUICK WAX

You have questions about the product - S05 One Step, Heavy Cut & Gloss – polishing paste

    Related articles

    Also check

    Our FAQ answers to frequently asked questions

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę