Wyszukaj na stronie
Menu

Epoxy Primer 4:1 Anticorrosion

We primarily recommend it for surface corrosion protection.

The 4:1 epoxy anti-corrosion primer can be used on all parts of yachts and boats made of steel, both above and below the waterline.

CapacityCode
set (primer + hardener)750 ml5076
primer6 l5145
hardener1,5 l 5147
Epoxy Primer 4:1 Anticorrosion

Technical informations

Color

  • Oxygen red

Product description "Epoxy Primer 4:1 Anticorrosion"

  • 2-component epoxy anti-corrosive primer.
  • Recommended for priming steel and aluminum.
  • Excellent substrate protection against corrosion.
  • Provides very good adhesion.
  • Good flow gives a perfect finish.
  • Easy to mix and apply.
  • Caution: does not drip from vertical surfaces.
  • Cans contain components and room for mixing them.
  • First layer: Raw surface, epoxy or polyester filler, epoxy primers
  • Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
  • Does not require sanding between coats while maintaining the suggested time interval.

Basic information

TypeSteel, aluminium
PlaceAbove and below waterline
FunctionGrounding
Intercoating
Filling coat
Anticorrosive
Applicationbrush, roll, spray gun
ThinningYes – thinner for epoxy system
Theoretical coverage For 1l11-12 m2 for
85 μm WFT/ 60 μm DFT
Number of coats2 – 3
Pot life -20°C2 h
Time between layers without sanding4 h – 5 days

You have questions about the product - Epoxy Primer 4:1 Anticorrosion

    Also check

    Our FAQ answers to frequently asked questions

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Can I use universal thinner?

    We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę