Wyszukaj na stronie
Menu

C3 Shampoo With Wax

C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.

Shake well before use. Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

CapacityCode
250 ml300006980
C3 Shampoo With Wax

Technical informations

Color

  • milky

Application method

Manually:

  • soft brush
  • cloth

Product description "C3 Shampoo With Wax"

The wax in Sea-Line® C3 SHAMPOO WITH WAX does not damage plastic components.

Consistency:

  • Thick liquid

Odour:

  • Citric

Solubility in water:

  • 100%

C3 Shampoo With Wax - instructional video

Surface preparation

  • Clean the surface with water to remove sand and stones.
  • Shake the container containing C3 shampoo with wax before use.
  • Dissolve a small amount of the product in lukewarm water.
  • Wash the surface thoroughly to remove any dirt.
  • Rinse thoroughly with water to remove any shampoo residue.

Further work:

  • To achieve a higher shine, polish the surface by hand (with a soft cloth) after it dries.
  • If necessary, the surface can be additionally protected with wax.

You have questions about the product - C3 Shampoo With Wax

    Also check

    Our FAQ answers to frequently asked questions

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę