Language:

Transpacyfik Solo

Home » Cooperation and sponsoring » Transpacyfik Solo
Kosmetyki do naprawy łodzi oraz jachtów

Romuald Koperski

A traveller, guide to Siberia, pioneer of automobile expeditions across the extensive regions of Siberia, automobile pilot, writer, journalist, photographer, diver and musician-pianist. A writer of the books: (“Duel with Siberia”, “Through Siberia without a Ticket “,”1001 Pictures of Siberia”), of photographic exhibitions and of many other publications on Siberia, which he has travelled the length and breadth of the country.

An originator and organiser of three editions of the automobile rally “Transsiberia”, which lasted for 39 days, the longest and the most difficult automobile rally in the world “Transsiberia – Gigant 2004”, Atlantic – Pacific – Atlantic, which had 30.000km.

http://www.romualdkoperski.pl


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę