Γλώσσα:

Transpacyfik Solo

Farby szkutnicze

Romuald Koperski

A traveller, guide to Siberia, pioneer of automobile expeditions across the extensive regions of Siberia, automobile pilot, writer, journalist, photographer, diver and musician-pianist. A writer of the books: (“Duel with Siberia”, “Through Siberia without a Ticket “,”1001 Pictures of Siberia”), of photographic exhibitions and of many other publications on Siberia, which he has travelled the length and breadth of the country.

An originator and organiser of three editions of the automobile rally “Transsiberia”, which lasted for 39 days, the longest and the most difficult automobile rally in the world “Transsiberia – Gigant 2004”, Atlantic – Pacific – Atlantic, which had 30.000km.

http://www.romualdkoperski.pl


Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę