Γλώσσα:

Αποθήκευση – πλαστικά και μεταλλικά δοχεία

Ιστοσελίδα » Προϊόντα » Συμπληρωματικά προϊόντα » Αποθήκευση – πλαστικά και μεταλλικά δοχεία
Farby szkutnicze

PLASTIC CUPS (BUCKETS) WITH LID

Convenient containers for mixing and storing paints and lacquers, complete with lids.

wiadra

0,365 L300003441
0,6 L300003437
1 L300003439
3 L300002749
5 L300002750

PLASTIC BOTTLE PEHD WITH CORK

Handy bottles with scale and cork, for thinners, lacquers, hardeners, etc.

buteleczka z podzialka

100 ml300004341
250 ml300002831
500 ml300002833
1 l300002834

TOUCH UP PAINT BOTTLE

Product is a perfect solution for customers of paint mixing stations and paint workshop. Each bottle is provided with screw cap with brush and small ball for better mixing.
buteleczka do zaprawek

25 ml300002018

METAL CAN

puszki

box under the lid:codethe lid to the box
0,25 L
0,5 L
1 L
2,5 L
500001132
500002490
500001039
500001226
500000408
500000428
500000428
500003544
can under the cork:codethe cork to the can
0,25 L
0,5 L
1 L
500001139
500001084
500001038
500000994
500001001
500001001
gallon (3,75 L)codethe lid to the gallon
500000180500003543
bucketcodethe lid to the bucket
3 L
5 L
10 L
20 L
500001190
500001227
500001261
500001232
– with the lid
500004543
500005050
500005050
canister under the corkcodethe cork to the canister
2,5 L
5 L
500001910
500001911
500001001

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę