Wyszukaj na stronie
Menu

Epoxy filler lightweight

Recommended for large areas due to low own weight

CapacityCode
750 ml12202
7,5 l12288
Epoxy filler lightweight

Technical informations

Product description "Epoxy filler lightweight"

  • low weight and easy sanding allow to use light epoxy filler on large surfaces
  • specific gravity of the product allows the apliacation of a thick layer without defects
  • recommended for leveling large areas during boat construction and repair
  • to repair large defects caused by osmosis
  • repair of damage, cracks and scratches
  • easy to prepare and apply
  • cans contain such an amount of ingredients that there is place for mixing ingredients A and B (base and hardener)
  • 50 minutes of pot life (in 20°C)
  • hard to sanding (in 20°C)  after 20 hours
  • 1:1 by volume
  • 100:100 by weight
  • 0,7kg/1L
  • First layer: epoxy primers Sea-Line, 2K paints
  • Second layer: epoxy primers, 1K universal primer, polyurethane paint, antifoulings

Epoxy filler lightweight - instructional video

Basic information

Typelaminate, wood, stell, aluminium
Placeabove and below waterline
Functionlarge areas
Weight1l = 700 g
Aplicationputty knife
Koloroff white

You have questions about the product - Epoxy filler lightweight

    Also check

    Our FAQ answers to frequently asked questions

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę