Wyszukaj na stronie
Menu

C3 Shampoo With Wax

C3 SHAMPOO WITH WAX is a shampoo with wax for cleaning and protecting gelcoat and painted surfaces. High cleaning power and finish in gloss.

Shake well before use. Let a small amount dissolve in warm water and clean the vessel. After treatment, always rinse with fresh water. Polish with a dry, soft cloth to retrieve a high gloss shine.

CapacityCode
250 ml300006980
C3 Shampoo With Wax

Technical informations

Color

  • milky

Application method

Manually:

  • soft brush
  • cloth

Product description "C3 Shampoo With Wax"

The wax in Sea-Line® C3 SHAMPOO WITH WAX does not damage plastic components.

Consistency:

  • Thick liquid

Odour:

  • Citric

Solubility in water:

  • 100%

C3 Shampoo With Wax - instructional video

Surface preparation

  • Clean the surface with water to remove sand and stones.
  • Shake the container containing C3 shampoo with wax before use.
  • Dissolve a small amount of the product in lukewarm water.
  • Wash the surface thoroughly to remove any dirt.
  • Rinse thoroughly with water to remove any shampoo residue.

Further work:

  • To achieve a higher shine, polish the surface by hand (with a soft cloth) after it dries.
  • If necessary, the surface can be additionally protected with wax.

You have questions about the product - C3 Shampoo With Wax

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę