Wyszukaj na stronie

Sea-Line antifouling

The hull was painted follow recommendations of Sea-Line manufacturer. At first layer epoxy primer and then three layers antyfoulingu Sea-Line.

The unit stayed about three months on the rich in algae Lagoon Zegrzyński. Photos illustrate the hull after the season.

“I would recommend Sea-line antifouling :)”

Sea-Line antifouling
  • farba jachtowa antyporostowa
  • farba jachtowa antyporostowa
  • farba jachtowa antyporostowa

Do you have questions about "Sea-Line antifouling"

    Also check

    Our FAQ answers to frequently asked questions

    Why are the streaks formed?

    Possible causes

    • Wrong viscosity and spraying technique,
    • Failure to maintain proper evaporation time and thickness of layers,
    • Incorrect spraying pressure,
    • Too low temperature of varnish, surface or space ,
    • Wrong thinner or hardener.

    How to prevent

    • Apply the right type of application method indicated by manufacturer,
    • Use working spray guns,
    • Both the object and material must have room temperature of 20ﹾC,
    • Apply correct proportion of base and hardener.

    How to remove

    • Grinding and polishing,
    • Grinding and painting,

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Contamination in topcoat paint?

    Possible causes

    • Inaccurate surface cleaning before paint application,
    • Incorrect painting tools preparation (brush and roll),
    • Performing work in a place exposed to constant contact with dust.

    How to prevent

    • Careful surface preparation (grinding, clearing, degreasing),
    • Careful painting tools preparation before use,
    • Maintain clean work environment

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę