Langue:

Diluant – de revêtement par projection

Accueil » Produits » Additives » Diluant – de revêtement par projection
Sea Line farby jachtowe
Diluant – de revêtement par projection

Le dilutif pour les produits polyuréthane est un mélange de dilutifs organiques choisis. Produit adapté à diluer les produits polyuréthane – peinture couleur et vernis incolore. En effet, il permet d’obtenir un produit aux paramètres strictement définis. Les proportions détaillées d’utilisations sont données sur les fiches techniques des produits. Il ne faut pas dépasser les doses recommandées de dilutif.


Emballage :1 l
Codes : 5747
COLOREURRAL
Blanc____50–55%
Crémeux101550–55%
Rouge300345-50%
Bleu marine500345-50%
Bleu501545-50%
Vert602945-50%
Gris700045-50%
Noir900545-50%
Vernis polyuréthane incolore – éclat function primairex15-20 %
Vernis polyuréthane incolore – éclatx0-20 %

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę