Spray Thinner For Polyurethan

Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of spray polyurethane topcoats — colored and colorless.

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.

Capacity	Code
1 l	5747

Technical informations

Application method

Spray gun

Product description "Spray Thinner For Polyurethan"

Spray thinner for polyurethane paints is a mixture of carefully selected solvents, and its use allows obtaining a product with strictly defined parameters. Spray thinner for polyurethane paints ensures proper application and drying. It ensures the preservation of very important application properties and parameters such as flowability, working time, and drying speed.

COLOR	RAL
White	____	50–55%
Light ivory	1015	50–55%
Ruby red	3003	45-50%
Sapphire blue	5003	30-35%
Sky blue	5015	45-50%
Mint green	6029	45–50%
Squirrel grey	7000	45–50%
Jet black	9005	45–50%
Clear Coat PRIMER function	X	15-20 %
Clear Coat TOPCOAT function	X	0-20 %

Also check

Brush Roll Thinner For Polyurethan
Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for
Brush Roll Thinner For Polyurethan
Thinner For 1k (Primer, Varnish, Enamel)
It is very important to use paint thinners, which provide the appropriate parameters of paint
Thinner For 1k (Primer, Varnish, Enamel)
Thinner for epoxy primers
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which
Thinner for epoxy primers

Our FAQ answers to frequently asked questions

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.