Storage – Plastic Cups

Easy paint dispensing material. Ratio diagram printed on a cup facilitates accurate and error-free measuring two-component paints and thinners. Can be use with the lid.

Capacity	Code
400 ml	300008021
650 ml	300008022
1300 ml	300008023
2240 ml	300008024

Storage – Plastic Cups

Also check

Brush Professional Sea-Line®
Especially recommended for topcoat paint – enamel, paints, varnish, clear coats and gel coats. Computermolded
Brush Professional Sea-Line®
Brush Sea-line®
12 mm is the perfect tool for the application of epoxy primers and antifoulings. It
Brush Sea-line®
Roll And Holder Roll Sea-Line®
Made from the highest quality natural lamb wool (100%) of the fleece long-guests 4mm is
Roll And Holder Roll Sea-Line®

Our FAQ answers to frequently asked questions

Possible causes

No thinning, wrong thinner or wrong amount of thinner
Wrong type of roll or brush (wrong bristle lenght)
Applying too much or too Little paint,
During painting process temperature was too high or the air was too dry,
Incorrect preparation of too porous surface,
Incorrect proportion of thinner.

How to prevent

Use a brush/Toller suited to the type of surface or paint,
Use thinner which is dedicated to the type of application and paints
Use thinning proportions which was indicated by manufacturer,
Paint in right atmosphere conditions indicated by manufacturer,

How to remove

Grind, clean and paint again.

Possible causes

Wrong surface preparation,
Skipping the primer in the system application process,
Use of universal thinners or replacements ,
Paint incompatibility.

How to prevent

Correct surface preparation (grinding, clearing, degreasing),
Use primers which improve adhesion of paints,
Use thinners which are dedicated to each paints,
Use of paints which are compatible to each other.

How to remove

Grind, clean and paint again.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.