Wyszukaj na stronie

Polyurethane Topcoat – color

This marine polyurethane topcoat paint is primarily recommended for protecting and renewing surfaces above the waterline. It provides an aesthetic and flawless appearance for the boat, such as the hull, superstructure, and decks.

A characteristic feature of this paint is its high resistance to UV rays, marine atmosphere, and scratches. Importantly, the paint can be polished after curing. It is recommended primarily for application above the waterline.

ColorCapacityCode
White750 ml / 15 l5356 / 6222
Light ivory750 ml / 15 l5657 / 7727
Ruby red750 ml / 15 l5656 / x
Sapphire blue750 ml / 15 l5655 / 7779
Sky blue750 ml / 15 l8162 / 8162
Mint green750 ml / 15 l7322 / x
Squirrel grey750 ml / 15 l7438 / 7439
Jet black750 ml / 15 l6262 / 7994
Polyurethane Topcoat – color

Application method

Before applying topcoat paints, it is recommended to prime the surface to achieve better adhesion between paint systems and to protect the surface. During painting work, it is recommended to use products from the same production batch of the specific item.

Product description "Polyurethane Topcoat – color"

  • Polyurethane topcoat yacht paint especially recommended above the waterline.
  • UV resistance and weathering.
  • High Gloss.
  • High mechanical strength.
  • The viscosity of the paint and the amount of pigment provides high performance and high opacity.
  • Spreading gives a perfect finish.
  • Easy to mix and apply.
  • Caution: does not drip from vertical surfaces.
  • Cans include components and room for mixing them.
  • Special thinners matched to the type of application (brush/ roll or spray).
  • First layer: epoxy primer Sea-Line, two-component paints.

Polyurethane Topcoat – color - instructional video

Roller / brush

Spray

Basic information

TypeLaminates GRP, wood, steel, aluminum
PlaceAbove waterline
FunctionHigh gloss top coat
Applicationbrush, roll, spray gun
ThinningRoll/ brush thinner for PUor

Spray thinner for PU

Theoretical coverage For 1l13-14 m2 for 75 μmWFT/ 40 μm DFT
Number of coats1 – 3
Pot life 20°C3 h
Time between layers without sandingminimum 30 minutes

You have questions about the product - Polyurethane Topcoat – color

    Farba poliuretanowa

    Also check

    Our FAQ answers to frequently asked questions

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Wyjście
    Przeiń na górę