Wyszukaj na stronie
Menu

“Universal” backing plate

Standard backing plate intended for polishing head with elastic edge. Available in two sizes up to 150 mm and 180 mm head.

SizeColorRecommended for padsCode
∅ 120 mmyellow / blueØ130 - Ø150300007623
∅ 150 mmyellow / blackØ150 - Ø180 - Ø 200300005880
“Universal” backing plate

You have questions about the product - “Universal” backing plate

    Also check

    Our FAQ answers to frequently asked questions

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę