Wyszukaj na stronie

C4 Teak Cleaner

C4 Teak Cleaner  is a very powerful water-soluble, biodegradable concentrate for quick and efficient restoration of teak wood.

The product is designed to easily and effectively remove dirt from the surfaces of teak, exotic and other types of wood.

 

CapacityCode
250 ml300006981
C4 Teak Cleaner

Color

  • transparent

Application method

Manually:

  • soft brush
  • cloth

Product description "C4 Teak Cleaner"

C4 restores color and leaves no residue (as opposed to acidic products). The modern concentrate formula allows you to easily obtain the appropriate concentration of the agent and immediately and effectively remove all types of contamination from the surface.

Also is safe for sealant joints.

Consistency:

  • Liquid

Odour:

  • Characteristic

Solubility in water:

  • 100%

C4 Teak Cleaner - instructional video

Surface preparation

  • Clean the surface with water to remove sand and stones.
  • Before cleaning the wooden surface with C4 Teak Cleaner, thoroughly wet the surface to absorb the water.
  • Dilute C4 Teak Cleaner with water in the following ratio:
    • 1:20 for moderate soiling
    • 1:10 for heavy soiling
  • Remove dirt by moving along the grain of the wood using a soft brush.
  • For very dirty surfaces, leave the cleaner on the application site for 5 to 15 minutes, without allowing it to dry.
  • Remove dirt and residue with clean water, rinsing the surface thoroughly.

Further work:

  • After drying, protect the surface with O1 TEAK OIL.

You have questions about the product - C4 Teak Cleaner

    x

    STEP BY STEP – Sea-Line®  C4 Teak Cleaner

    How to restore wood ?

    Wood, over time, may start to look like in the picture below. It can easily and quickly be restored. C4 Teak Cleaner can be used on all kinds of wood used in boatbuilding. C4 is recommended also as a compound cleaning wooden elements (benches, tables, balustrades or entresols) in a household.

    STEP 1 – Soak the surface

    Before you start cleaning, soak the surface thoroughly  and let it absorb water.

    x

    x

    STEP 2 – Prepare Sea-Line C4 Teak Cleaner

    Thin Sea-Line C4 Teak Cleaner with water at a ratio of:

    • 1:10 for heavy contaminants
    • 1:20  for average contaminants

    STEP 3 – Wood cleaning

    Leaving C4 Teak Cleaner on the surface max. 15 minutes before starting the cleaning, will make it easier to clean it efficiently. C4 Teak Cleaner should not dry out on the surface after application.

    x

    x

    Using a soft brush, remove contaminants moving along the growth rings.

    STEP 4 – Rinse

    Removed  contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

    x

    x

    STEP 5 – Efect after first cleaning

    If necessary, fragments which were not cleaned for the first time due to high contamination and require more thorough cleaning, should be cleaned again.

    STEP 6- Secure

    After drying, wood can be secured with teak oil.

    Sea-Line® C4 TEAK CLEANER  is biodegradable, water-soluble product for quick and efficient cleaning of teak wood, exotic wood and other kinds of wood. C4 Teak restores the colour and leaves no residues difficult to remove. The product is safe for sealants and adhesives during the wood cleaning.

    The picture shows a cleaned surface (right side) and its condition before using C4 Teak Cleaner (left side).

    x

    Also check

    Our FAQ answers to frequently asked questions

    Can I use yacht paints for a drinking water tank?

    Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Wyjście
    Przeiń na górę