Paper Paint Strainer

Disposable paper strainer with nylon mesh purposed for filtering mechanical impurities from paints and lacquers.

Grammage	Code
125 µm	300008886
190 µm	300008887

Paper Paint Strainer

Also check

Brush Professional Sea-Line®
Especially recommended for topcoat paint – enamel, paints, varnish, clear coats and gel coats. Computermolded
Brush Professional Sea-Line®
Brush Sea-line®
12 mm is the perfect tool for the application of epoxy primers and antifoulings. It
Brush Sea-line®
Roll And Holder Roll Sea-Line®
Made from the highest quality natural lamb wool (100%) of the fleece long-guests 4mm is
Roll And Holder Roll Sea-Line®

Our FAQ answers to frequently asked questions

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

Possible causes

Too thin layer of antifouling paint,
Choosing the wrong antifouling to type of a boat or yacht
Thinning of antifouling paint,
Incorrect surface preparation before antifouling application.

How to prevent

Apply the right layer thickness of paint indicated by manufacturer,
Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
Do not thin antifouling because of the risk of reducing effectiveness,
Careful surface preparations (grinding, clearing, degreasing),

How to remove

Wet grinding, apply new layers of antifouling paint.
Use C1 shell and fouling remover.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.