Brush Professional Sea-Line®

Especially recommended for topcoat paint – enamel, paints, varnish, clear coats and gel coats. Computermolded fiber with a length of 51mm KONEX of appropriate hardness combined with the highest quality topcoats guarantees a proper leveling of paint.

The ideal thickness of the brush (8 mm) for easy application the right amount of paint for one coating layer.

Width	Code
50 mm	300006823
70 mm	300008513

Also check

Brush Sea-line®
12 mm is the perfect tool for the application of epoxy primers and antifoulings. It
Brush Sea-line®
Roll And Holder Roll Sea-Line®
Made from the highest quality natural lamb wool (100%) of the fleece long-guests 4mm is
Roll And Holder Roll Sea-Line®
Sea-Line® Roller Holder
Roller with a width of 150 mm and a thickness of 35 mm is the
Sea-Line® Roller Holder

Our FAQ answers to frequently asked questions

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Possible causes

Too short time for evaporation of the thinner,

How to prevent

Maintain the right conditions for complete evaporation of the thinner,

How to remove

Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
Polish surface if needed.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.