Non Skid Powder

Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats.

Add powder to the mixture, mix well and wait 15 minutes. Apply with a short-haired roller. During application, paint must be mixed often.

Weight	Code
20g	300005474

Technical informations

Safety data sheet SDS

Application method

To prepare a mixture of Sea-Line® polyurethane paint or varnish according to the instructions:

Add the anti-slip powder to the mixture in proportion to the prepared amount of paint or varnish.
Mix well and let it sit for 15 minutes.
Apply with a short-haired roller or brush.
Stir frequently during application.

Product description "Non Skid Powder"

The 20 gram package of anti-slip powder is intended for 750 ml of polyurethane paint (color) or clear polyurethane varnish.

Also check

Parafina Sea-Line
Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply
Parafina Sea-Line
Lamination – fiberglass and glassfabric
Fiberglass reinforcements, including boat mats and fiberglass fabrics combined with resin, are used for repairs
Lamination – fiberglass and glassfabric
Polymer
Is elastic sealant recommended for sealing and bonding various types of materials.
Polymer

Our FAQ answers to frequently asked questions

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.