Wyszukaj na stronie

Spray Thinner For Polyurethan

Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of spray polyurethane topcoats — colored and colorless.

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.

CapacityCode
1 l5747
Spray Thinner For Polyurethan

Application method

  • Spray gun

Product description "Spray Thinner For Polyurethan"

Spray thinner for polyurethane paints is a mixture of carefully selected solvents, and its use allows obtaining a product with strictly defined parameters. Spray thinner for polyurethane paints ensures proper application and drying. It ensures the preservation of very important application properties and parameters such as flowability, working time, and drying speed.

Basic information

COLORRAL
White____50–55%
Light ivory101550–55%
Ruby red300345-50%
Sapphire blue500330-35%
Sky blue501545-50%
Mint green602945–50%
Squirrel grey700045–50%
Jet black900545–50%
Clear Coat
PRIMER function
X15-20 %
Clear Coat
TOPCOAT function
X0-20 %

You have questions about the product - Spray Thinner For Polyurethan

    Also check

    Our FAQ answers to frequently asked questions

    Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

    Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

    Can I add some thinner to antifouling paint?

    There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.
    Wyjście
    Przeiń na górę