Wyszukaj na stronie
Menu

Silver Cruise Polishing Antifouling

Silver Cruise Polishing Antifouling it’s effectively preventing fouling organism: aquatic plants and animals or slime

ColorCapacityCode
white0,75 l300008388
white2,5 l300008387
red0,75 l300008390
blue0,75 l300008392
blue2,5 l300008391
navy0,75 l300008394
navy2,5 l300008393
black0,75 l300008396
black2,5 l300008395
Silver Cruise Polishing Antifouling

Technical informations

Color

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.

Product description "Silver Cruise Polishing Antifouling"

  • Ideal paint for professional and consumer application on salt and fresh water.
  • This antifouling is recommended to use on sailboats or powerboats up to 30 knots of speed.
  • Easy application.
  • No need to sand between coats, increased efficiently.
  • Increased speed boats.
  • Thinning is not recommended because it reduces the effectiveness of the paint.
  • Silver Cruise Polishing Antifouling Sea-Line® can be applied on hulls made of :
    • laminate
    • steel
    • wooden
    • Do not use on aluminum or zinc surfaces.
  • As a primer coat, use Sea-Line® epoxy primer  – for example:  Sea-Line® Antisorrosiv protection 4:1,  Lightprimer 5:1, Universal primer 1K.

Basic information

TypeGRP laminates, wood, steel
PlaceBelow waterline
Function Antifouling paint discourages the growth
of barnacles, weed, and other water life on the submersed hull of the boat.
Application brush, roll

airless spray gun (only professional)

Thinning *No recommended
Theoretical coverage For 1lby rollerby spray
9 ~ 10 m²3 ~ 5 m²
Coat thickness (WTF)98 μm196 μm
Finish thickness (DTF)50 μm100 μm
Coats number21
Recommended dry layer100 μm
Hardening the surfaces23ºC15ºC
Touch dry30 minutes45 minutes
Immersion:4 hours6 hours
Dry to recoat (overcoating)min. 6 hoursmin. 10 hours
Dry to launch (immersion times)max 6 monthsmax 6 months

You have questions about the product - Silver Cruise Polishing Antifouling

    Thinning notice:

    In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
    Dilution and the application method directly affect the thickness of the antifouling paint layer.

    Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

    Antifouling available only in:

    • Germany
    • Austri (Österreich)
    • France
    • Italian
    • no UE countries

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę