Thin Film Silver Racing Antifouling

THIN FILM Silver Racing is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime.

Color	Capacity	Code
graphite	0,75 l	300008380
graphite	2,0 l	300008379

Technical informations

Product description "Thin Film Silver Racing Antifouling"

Ideal paint for professional and consumer application on salt and fresh water.
This antifouling is recommended to use on racing boat and powerboats, guaranteeing a smooth finish.
The hard and smooth film, achieved at easy application without sanding between coats, increased speed and efficiently.
Fast drying it’s quick overcoating and flexible launch times.
Easy in application, no need to sand between coats, increased speed and efficiently.
Thinning is not recommended because it reduces the effectiveness of the paint.
THIN FILM Silver Racing Sea-Line® can be applied on hulls made of :
- laminate
- steel
- wooden
- do not use on aluminium and zinc surfaces,
- do not use on primer which include aluminium components
As a primer coat, use Sea-Line® epoxy primer – for example: Sea-Line® Antisorrosiv protection 4:1, Lightprimer 5:1, Universal primer 1K.

Type	GRP laminates, wood, steel
Place	Below waterline
Function	Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat.
Application	brush, roll only professional : airless spray gun or conventional spray
Thinning *	No recommended
Theoretical coverage For 1l	by roller	by spray
	11 ~ 12 m²	4 ~ 6 m²
Coat thickness (WTF)	80 μm	160 μm
Finish thickness (DTF)	30 μm	60 μm
Coats number	2	1
Recommended dry layer	60 μm
Hardening the surfaces	23ºC	15ºC
Touch dry	20 minutes	30 minutes
Immersion:	2 hours	3 hours
Dry to recoat (overcoating)	min. 6 hours	min. 10 hours
Dry to launch (immersion times)	max 6 months	max 6 months

Antifouling available only in:

Germany
Austri (Österreich)
France
Italian
no UE countries

Also check

Antifouling selfpolishing
The self-polishing antifouling paint is a product recommended primarily for protecting the hulls of fiberglass
Antifouling selfpolishing
Hard Antifouling
Hard antifouling is a hard antifouling paint recommended for owners of motorboats and sailboats moving
Hard Antifouling
Silver Speed Hard Antifouling
Silver Speed HARD Antifouling is a hard antifouling paint, effectively preventing fouling organism: aquatic plants
Silver Speed Hard Antifouling

Our FAQ answers to frequently asked questions

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.