Wyszukaj na stronie
Menu

New premium polishing wool

New in the 2023 season is a new polishing wool

The new black and white polishing pads in premium quality are intended primarily for polishing light and dark gel coats on laminate products, tool gel coats and PU varnishes.

They are perfect for removing matting and scratches on large surfaces. Most importantly, the new polishing heads optimize efficiency and reduce working time. Premium furs are designed to provide the best possible cutting speeds and forces. This is possible due to the fact that the fur is made of a high-quality mixture of 100% natural wool with equal length and twist of fibers.

New premium polishing wool

It has a significantly extended useful life compared to other furs. The Long Life polishing pad is available in a single-sided version with a diameter of 190 mm and a double-sided version with a diameter of 230 mm.

  • To sum up the most important features of Lamb Wool Long Life polishing wool
  • 100% natural wool blend.
  • It does not contain synthetic fibers that heat surfaces.
  • Does not discolor.
  • The twisted strands ensure consistency of work across the entire surface without the risk of damaging the surface.
  • Maximized fiber density for a larger polishing surface and optimal performance.
  • The flexible base and soft rounded edges make it easy to work on highly profiled surfaces.
  • The fur is recommended for strongly cutting Sea-Line polishing pastes such as: S0, S05, S07, S08.

Polishing products on offer:

An overview of polishing products for yachts and boats offered by the Sea-Line.

Other polishing products for use in the furniture and automotive industries can be found here.

Also check

Our FAQ answers to frequently asked questions

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Wyjście
Przeiń na górę