NEW! Polyester spray filler

Sea-Line Offerhas been extended with a new polyestersprayfiller.

two componentpoyester spray filler.
recommended for priming fibregras reinfoced hulls and other GFK surfaces.
for filling small cracks and indentations before painting.
finishing layer other polyester surfaces (putties, fillers, laminates).

Also check

Sea-Line News 2024
We are expanding our offer by introducing two new products that will provide boat enthusiasts
Sea-Line News 2024
Join us at METSTRADE 2023
Come and join us at METSTRADE 2023, METSTRADE the best event for marine industry professionals,
Join us at METSTRADE 2023
Welcome to Troton
Visit us and our production plant without traveling
Welcome to Troton
New premium polishing wool
New in the 2023 season is a new polishing wool The new black and white
New premium polishing wool

Our FAQ answers to frequently asked questions

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.