O1 Teak Oil

• Amber (transparent)

Manually:

• brush
• roll
• cloth

Application process:

• Mix the ingredients until a uniform color is achieved.
• Before applying O1TEAK OIL Sea-Line®, ensure the surface is dry and the wood moisture content does not exceed 18%.
• Apply one coat of O1 TEAK OIL Sea-Line® until the wood is fully covered.
• DO NOT ALLOW THE SURFACE TO DRY; subsequent coats should be applied wet-on-wet.
• Apply the next coat approximately 30 minutes after applying the first coat.
• Apply O1 TEAK OIL Sea-Line® until the wood is fully saturated.
• After full saturation, remove any excess O1 TEAK OIL Sea-Line® from the surface.
• NOTE: Failure to remove excess O1 TEAK OIL Sea-Line® from the surface will result in a glossy finish after it dries

Finishing work:

After 3 days of application, you can begin using the O1 TEAK OIL Sea-Line®-treated element.
Due to exposure to UV rays, the oily appearance of the wood will gradually fade with use.
When the wood turns slightly gray, reapply O1 TEAK OIL Sea-Line® according to the instructions.

• O1 TEAK OIL is one-component oil for exotic wood which is difficult to impregnate, e.g.: teakwood, mahogany, ipe wood, movingui wood, etc.
• O1 TEAK OIL protects wood from dampness and mold growth
• It does not require additional primer
• Excellent penetrating qualities into wood structure
• It does not leave any greasy layer on surface
• When applied directly onto wood surface it creates insulating layer
• It does not drip from vertical surfaces
• Can contains product ready for application
• O1 TEAK OIL is designed for using above and below the waterline as well as inwards
• Easy for maintaining cleanliness
• O1 TEAK OIL may also be used as security of: stairs, banisters, terrace wood, garden furniture and other elements made of natural wood