Wyszukaj na stronie
Menu

C4 Teak Cleaner

C4 Teak Cleaner  is a very powerful water-soluble, biodegradable concentrate for quick and efficient restoration of teak wood. C4 restores color and leaves no residue (as opposed to acidic products). Also is safe for sealant joints.

Thin with water. For normal dirt add 1 part of C4 on 20 parts of water.

CapacityCode
250 ml300006981
C4 Teak Cleaner

Technical informations

Color

  • transparent

Application method

Manually:

  • soft brush
  • cloth

Product description "C4 Teak Cleaner"

For heavy dirt add 1 part C4 on 10 parts of water. Thoroughly soak the surface first with water. Use a suitable broom or brush to scrub the deck with Teak Clean perpendicular to the wood grain. Rinse with plenty of water.

You have questions about the product - C4 Teak Cleaner

    x

    STEP BY STEP – Sea-Line®  C4 Teak Cleaner

    How to restore wood ?

    Wood, over time, may start to look like in the picture below. It can easily and quickly be restored. C4 Teak Cleaner can be used on all kinds of wood used in boatbuilding. C4 is recommended also as a compound cleaning wooden elements (benches, tables, balustrades or entresols) in a household.

    STEP 1 – Soak the surface

    Before you start cleaning, soak the surface thoroughly  and let it absorb water.

    x

    x

    STEP 2 – Prepare Sea-Line C4 Teak Cleaner

    Thin Sea-Line C4 Teak Cleaner with water at a ratio of:

    • 1:10 for heavy contaminants
    • 1:20  for average contaminants

    STEP 3 – Wood cleaning

    Leaving C4 Teak Cleaner on the surface max. 15 minutes before starting the cleaning, will make it easier to clean it efficiently. C4 Teak Cleaner should not dry out on the surface after application.

    x

    x

    Using a soft brush, remove contaminants moving along the growth rings.

    STEP 4 – Rinse

    Removed  contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

    x

    x

    STEP 5 – Efect after first cleaning

    If necessary, fragments which were not cleaned for the first time due to high contamination and require more thorough cleaning, should be cleaned again.

    STEP 6- Secure

    After drying, wood can be secured with teak oil.

    Sea-Line® C4 TEAK CLEANER  is biodegradable, water-soluble product for quick and efficient cleaning of teak wood, exotic wood and other kinds of wood. C4 Teak restores the colour and leaves no residues difficult to remove. The product is safe for sealants and adhesives during the wood cleaning.

    The picture shows a cleaned surface (right side) and its condition before using C4 Teak Cleaner (left side).

    x

    Also check

    Our FAQ answers to frequently asked questions

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Is it necessary to always sand the surface between application of two different products?

    We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Wyjście
    Przeiń na górę