Lengua:

Imprimaciones: epoxi, 1K

Página web » Descargas » Imprimaciones: epoxi, 1K
Producent farb jachtowych
NOMBRE DEL ARCHIVODESCARGAS
TDSSDS
PRODUCTOENDURECEDOR
(comp. A)(comp. B)
EPOXY LIGHTPRIMER 5:1 (multifuncional)descargasdescargasdescargas
EPOXY PRIMER HS 3:2 (antiosmósis)descargasdescargasdescargas
EPOXY PRIMER 4:1 (anticorrosion)descargasdescargasdescargas
THINNER for epoxy primers (disolvente)XdescargasX
EPOXY PRIMER SPRAY (2K)downloaddescargasX
UNIVERSAL YACHTPRIMER 1KdownloaddescargasX
THINNER 1K (for primer, varnish, enamel)XdescargasX

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę