Thinner Polyester Spray Filler

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.

Capacity	Code
1 l	7934

Technical informations

Safety data sheet SDS

Characteristics

Thinner for: spray polyester putty

Product description "Thinner Polyester Spray Filler"

The thinner for spray polyester putty is a mixture of carefully selected organic solvents. The product designed for thinning Sea-Line® spray polyester putty allows obtaining a product with strictly defined parameters. It ensures proper application and drying. Detailed instructions on the proportions for use are provided in the technical data sheets of the respective products.

	Recommended dilution
Type of putty	Spray application
Polyester Spray Filler	0-10%

Also check

Spray Thinner For Polyurethan
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application
Spray Thinner For Polyurethan
Brush Roll Thinner For Polyurethan
Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for
Brush Roll Thinner For Polyurethan
Thinner For 1k (Primer, Varnish, Enamel)
It is very important to use paint thinners, which provide the appropriate parameters of paint
Thinner For 1k (Primer, Varnish, Enamel)

Our FAQ answers to frequently asked questions

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.