High Gloss Polyurethane Clear Coat – Varnish

It is a marine topcoat paint recommended for protecting wood and ensuring a long-lasting flawless appearance.

Capacity	Code
750 ml	6749
15 l	7506

High Gloss Polyurethane Clear Coat – Varnish

Technical informations

Color

None (clear)

Application method

By hand:

brush
roller

Spray:

pneumatic spray

Product description "High Gloss Polyurethane Clear Coat – Varnish"

High-gloss clear polyurethane coat recommended to protect wood and ensure a long-term, perfect appearance.
Does not require primer.
Diluted version of impregnated wood.
Protects the wood by forming a layer of primer.
Works as a high-gloss top coat without thinning.
Paint does not change the color of the wood after application.
UV resistant and weathering.
High mechanical strength.
Good flow gives a perfect finish.
Easy to mix and apply.
Caution: does not drip from vertical surfaces.
Cans contain components and room to mix them
Special thinners matched to the type of application (brush or spray).
First layer: epoxy primer Sea-Line, varnish, polyurethane Sea-Line.

Type	Wood, laminates GRP
Place	above waterline
Function	– Top coat (without thinner) – Primer (with thinner)
Application	brush, roll, spray gun
Thinning	Yes Roll/brush thinner or Spray thinner
Theoretical coverage For 1l	12÷13 m2 for 80 μmWFT/ 39 μm DFT
Number of coats	2 – 4
Pot life 20°C	3 h
Time between layers without sanding	min 20 m.

Also check

Polyurethane Topcoat – color
This marine polyurethane topcoat paint is primarily recommended for protecting and renewing surfaces above the
Polyurethane Topcoat – color
Yacht Enamel 1k
Topcoat marine paint 1K (single-component), recommended for use above the waterline and for interior spaces
Yacht Enamel 1k
Yacht Varnish 1k
This is a clear marine varnish, dedicated to wooden boats and yachts. This product is
Yacht Varnish 1k

Our FAQ answers to frequently asked questions

Possible causes

Too short time for evaporation of the thinner,

How to prevent

Maintain the right conditions for complete evaporation of the thinner,

How to remove

Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
Polish surface if needed.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.