Wyszukaj na stronie

Microfiber cloth 40 x 40 cm (blue)

The Sea-Line microfiber cloth is the perfect complement to polishing systems. It is used for hand polishing as well as for cleaning surfaces from any leftover polishing paste.

Thanks to its excellent absorbency, the cloth can be used for all cleaning tasks on the yacht.

SizeColorCode
40 x 40 cmblue300005249
Microfiber cloth 40 x 40 cm (blue)

You have questions about the product - Microfiber cloth 40 x 40 cm (blue)

    Also check

    Our FAQ answers to frequently asked questions

    Can I add some thinner to antifouling paint?

    There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

    Why the epoxy filler does not harden?

    Possible causes

    • Incorrect proportion of base and herdener,
    • Too low temperature of ambient and surface (less than 10ﹾC),
    • Mixing two components from two different manufacturers,

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
    • Use base and hardener from the same manufacturer

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why did the polyurethane topcoat become dull?

    Possible causes

    • Too short time for evaporation of the thinner,

    How to prevent

    • Maintain the right conditions for complete evaporation of the thinner,

    How to remove

    • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
    • Polish surface if needed.
    Wyjście
    Przeiń na górę