Microfiber apron

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Possible causes

• Too low temperature of ambitne,
• Incorrect proportion of base and herdener,
• Mixing two components from two different manufacturers

How to prevent

• Apply the correct proportions of components
• Maintain steady temperature (around 20ﹾC) during whole hardening process,
• Mix the products thoroughly and bleed the mixture.

How to remove

• The uncured mass requires complete removal from the surface.

Possible causes

• Wrong viscosity and spraying technique,
• Failure to maintain proper evaporation time and thickness of layers,
• Incorrect spraying pressure,
• Too low temperature of varnish, surface or space ,
• Wrong thinner or hardener.

How to prevent

• Apply the right type of application method indicated by manufacturer,
• Use working spray guns,
• Both the object and material must have room temperature of 20ﹾC,
• Apply correct proportion of base and hardener.

How to remove

• Grinding and polishing,
• Grinding and painting,