Wyszukaj na stronie

Double Side Wool Sea-Line

Double-sided polishing wool is made from 100% natural wool. Ideal for removing scratches and mates on large surfaces. This is ideal tool for polishing gelcoats, PU topcoats and lacquers.

The diameter of the applicator – 220 mm, supplied complete with mounting adapter polishing machine.

SizeColorRecommended backing plateCode
∅ 220 mmwhiteKits included300006614
Double Side Wool Sea-Line
  • Cut level = 10

Basic information

RECOMMENDED POLISH PASTErecommendedoptional
  • S0
  • S05
  • S07
  • S1
  • S1 PREMIUM

You have questions about the product - Double Side Wool Sea-Line

    Also check

    Our FAQ answers to frequently asked questions

    Why the resin does not harden?

    Possible causes

    • Too low temperature of ambitne,
    • Incorrect proportion of base and herdener,
    • Mixing two components from two different manufacturers

    How to prevent

    • Apply the correct proportions of components
    • Maintain steady temperature (around 20ﹾC) during whole hardening process,
    • Mix the products thoroughly and bleed the mixture.

    How to remove

    • The uncured mass requires complete removal from the surface.

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Can I add more hardener to speed up the reaction?

    Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

    Wyjście
    Przeiń na górę