Wyszukaj na stronie

Masking tape

High-quality masking tape characterized by very good adhesion on irregular surfaces, easy to remove without leave any  adhesive residue.

Saturated paper backing makes tape compatible with most common paints and lacquers. Heat resistant up to 800C. Backing: yellow saturated crepe paper, adhesive: rubber solvent based.

SizeCode
19 mm x 50 m300000530
25 mm x 50 m300000531
30 mm x 50 m300000532
38 mm x 50 m300000533
50 mm x 50 m300000534
Masking tape

You have questions about the product - Masking tape

    Also check

    Our FAQ answers to frequently asked questions

    Why the paint does not have the right flow?

    Possible causes

    • No thinning, wrong thinner or wrong amount of thinner
    • Wrong type of roll or brush (wrong bristle lenght)
    • Applying too much or too Little paint,
    • During painting process temperature was too high or the air was too dry,
    • Incorrect preparation of too porous surface,
    • Incorrect proportion of thinner.

    How to prevent

    • Use a brush/Toller suited to the type of surface or paint,
    • Use thinner which is dedicated to the type of application and paints
    • Use thinning proportions which was indicated by manufacturer,
    • Paint in right atmosphere conditions indicated by manufacturer,

    How to remove

    • Grind, clean and paint again.

    Do you have to paint the scratched side of the boat?

    If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

    Can I mix polyurethane paints to get a different color?

    Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

    Wyjście
    Przeiń na górę