Antifouling thinner

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time of drying.

Capacity	Code
750 ml	300008397

Technical informations

Safety data sheet SDS

Application method

ANTIFOULING THINNER is designed for thinning:

SELF-POLISHING ANTIFOULING
SELF-POLISHING ALU PLUS ANTIFOULING
HARD ANTIFOULING
SEAGUARD FOULING STOP

Product description "Antifouling thinner"

Using the appropriate thinner recommended by the manufacturer is not only about ensuring the correct technical parameters during application. The use of a thinner containing different chemical compounds will fundamentally change the structure of chemical bonds, thereby altering the final effect of Sea-Line® antifouling protection.

ANTIFOULING THINNER is a mixture of carefully selected solvents. The product designed for thinning Sea-Line® antifouling paints allows obtaining a product with strictly defined parameters. It ensures their proper application and drying.

ANTIFOULING THINNER can also be used to clean painting tools from residues of antifouling paints.

Also check

Spray Thinner For Polyurethan
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application
Spray Thinner For Polyurethan
Brush Roll Thinner For Polyurethan
Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for
Brush Roll Thinner For Polyurethan
Thinner For 1k (Primer, Varnish, Enamel)
It is very important to use paint thinners, which provide the appropriate parameters of paint
Thinner For 1k (Primer, Varnish, Enamel)

Our FAQ answers to frequently asked questions

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.