Polishing Cone (80mm)

Possible causes

• Too low temperature of ambitne,
• Incorrect proportion of base and herdener,
• Mixing two components from two different manufacturers

How to prevent

• Apply the correct proportions of components
• Maintain steady temperature (around 20ﹾC) during whole hardening process,
• Mix the products thoroughly and bleed the mixture.

How to remove

• The uncured mass requires complete removal from the surface.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Possible causes

• Inaccurate surface cleaning before paint application,
• Incorrect painting tools preparation (brush and roll),
• Performing work in a place exposed to constant contact with dust.

How to prevent

• Careful surface preparation (grinding, clearing, degreasing),
• Careful painting tools preparation before use,
• Maintain clean work environment

How to remove

• Grind, clean and paint again.