Gelcoat filler “Dry Fast”

Gelcoat Filler is very fast hard and easy in use.

Weight	Color	Code
100 g	Navy	14312
100 g	Light Grey 06	14313
100 g	Ivory 04	14315
100 g	Warm white 03	14314
100 g	Cold white 02	14311
100 g	RAL 9010 Pure white 02	14316
STYRENE FREE
250 g	RAL 9010	12021
250 g	RAL 9001	12022

Technical informations

Application method

Manually:

putty knife

Product description "Gelcoat filler “Dry Fast”"

Hardener is a paste
Recommended for filling minor scratches and splinters in gelcoat
Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
Adapted to work in an environment with high humidity
Creates a protective coating for water and the impact of UV radiation
After curing provides a high gloss, hard, clean and shiny surface
Resistant to prolonged exposure to even very polluted environment
When dry, does not remain sticky

Type	GRP Laminates
Place	Above waterline
Function	Scratches and small repairs
Pot life 20°C	6÷7 min
Hardening time 20°C	4 h

Also check

Epoxy Filler Universal
Epoxy fillers are primarily the only fillers recommended for use on hull components constantly immersed
Epoxy Filler Universal
Epoxy Filler with fiberglass
Epoxy fillers, including fiberglass filler, are primarily the only fillers truly recommended for use both
Epoxy Filler with fiberglass
Epoxy filler lightweight
Recommended for large areas due to low own weight
Epoxy filler lightweight

Our FAQ answers to frequently asked questions

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

Possible causes

Wrong viscosity and spraying technique,
Failure to maintain proper evaporation time and thickness of layers,
Incorrect spraying pressure,
Too low temperature of varnish, surface or space ,
Wrong thinner or hardener.

How to prevent

Apply the right type of application method indicated by manufacturer,
Use working spray guns,
Both the object and material must have room temperature of 20ﹾC,
Apply correct proportion of base and hardener.

How to remove

Grinding and polishing,
Grinding and painting,

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.