Wyszukaj na stronie
Menu

Do you know that last year we modern epoxy fillers recipes?

Do you know that last year we modern epoxy fillers recipes?  To avoid confusions check on label if product is marked with ikon “new” or not. To find TDS and SDS cards please click this link DOWNLOAD.

Below differences for each Sea-Line epoxy filler.

Do you know that last year we modern epoxy fillers recipes?

Epoxy filler lightweight

Epoxy filler lightweightOld recipeNew recipeDiffierences
ColorWhiteWhiteNo changes
Setting time24h20hA faster hardened product means faster readiness for further processing
Pot life 20ﹾC50 minutes50 minutesNo changes
Weight1L = 850 grams1L = 700 gramsLower product’s own weight
Proportions of mixingBy weight – 100:53

By volume – 2:1

By weight – 100:100

By volume – 1:1

Easier proportions of compounds mixing

Epoxy filler universal

Epoxy filler universalOld recipeNew recipeDiffierences
ColorGrayLight grayLighter shade of the new filler
Setting time5h15hLonger setting time
Pot life 20ﹾC10 minutes40 minutes30 minutes longer pot life
Weight1L = 1600 grams1L = 1540 gramsLower product’s own weight
Proportions of mixingBy weight – 100:44

By volume – 2:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

Epoxy filler with fibreglass

Epoxy filler with fibreglassOld recipeNew recipeDiffierences
ColorLight greenLight grayColor changes
Setting time24h16hSetting time reduced
Pot life 20ﹾC25 minutes50 minutes25 minutes longer pot life
Weight1L = 1800 grams1L = 1550 gramsLower product’s own weight
Proportions of mixingBy weight – 100:50

By volume – 1:1

By weight – 100:50

By volume – 2:1

Easier proportions of compounds mixing

Nowe receptury szpachlowek epoksydowych

Nowe receptury szpachlowek epoksydowych

Also check

Our FAQ answers to frequently asked questions

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Wyjście
Przeiń na górę