Wyszukaj na stronie
Menu

Merry Christmas and Happy New Year

Dears Sirs,

On the occasion of the upcoming holidays,
we would like to wish you a satisfying, rich
in business decisions and wellbeing
in private life Year 2019.

2019 will be a special year for us due to the 10th anniversary of the brand’s existence. This is a perfect opportunity to express our gratitude. During these 10 years we were able to meet many wonderful people without whom our success would not be possible.

We would like to thank everybody for the cooperation, meetings, valuable remarks, constructive criticism and commitment in building the Sea-Line Brand. We look into the future with great hope for further development and mutual satisfaction from the achieved results.

Merry Christmas and Happy New Year

Also check

Our FAQ answers to frequently asked questions

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Wyjście
Przeiń na górę