Wyszukaj na stronie
Menu

MS POLYMER NEW PRODUCT IN OFFER

MS POLYMER ist one of the most interesting new product in offer Sea-Line in 2018.
Thanks to advance dispensing system, MS POLYMER does not require extra tools to application, provides exact thickness of weld during application.

Characteristic features of MS POLYMER its resistance to UV and water and salt water), no need to priming and can be covered by any type of paint. MS POLYMER does not discolor surface (does not contain thinners and isocyanate).

MS POLYMER is elastic sealant recommended for sealing and bonding various types of materials, available in colors:

  • White (200ml, 100 ml)
  • Black (200ml)
  • Transparent (200ml)
MS POLYMER NEW PRODUCT IN OFFER

grape

Also check

Our FAQ answers to frequently asked questions

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Wyjście
Przeiń na górę